• Can be offered with New calibration certificate at extra cost.
• The IDA-1 is a One-Channel Infusion Device Analyzer, mains operated that allows for speedy verification of infusion device performance. The IDA-1 measures the flow rate and volume delivered, and the pressure generated in occlusions or blockages of the fluid line.

The post Ultramedic IDA-1 Infusion pumps Analyzer appeared first on Robin Medical Ltd.

The post Clinical Dynamics – SmartArm NIBP Simulator GX-2 appeared first on Robin Medical Ltd.

Technical Specifications:

The post IngMar Medical Adult/Pediatric Demonstration Lung Model appeared first on Robin Medical Ltd.

Technical Specifications:

The post MASAR PMA-1 Pacemaker Analyzer appeared first on Robin Medical Ltd.

The Covidien Genius 2 Thermometer Checker / Calibrator is a precision instrument designed to verify the accuracy and performance of the Genius 3 and Genius 2 Tympanic Thermometer. This compact and reliable checker ensures that thermometers are functioning within defined clinical standards, helping healthcare providers maintain accurate temperature readings in patient care environments. Easy to operate and portable, the Genius 2 checker is an essential tool for clinical quality assurance and routine equipment validation.

Technical Specifications:

Key Features:

• Ensures Accurate Temperature Readings: Verifies that Genius 3 & 2 thermometers remain calibrated to clinical standards.

• Quick and Simple Operation: Just insert the thermometer probe and press the button—results are provided instantly via status LED.

• Compact and Portable Design: Lightweight and easy to transport between departments or facilities.

• Reliable Quality Control Tool: Ideal for hospitals, clinics, and healthcare facilities aiming to maintain consistent diagnostic accuracy.

• Battery-Powered Convenience: Operates without the need for external power sources—great for mobile medical teams or field use.

• Durable Medical Build: Designed to withstand repeated use in fast-paced healthcare environments.

• Factory-Calibrated: Comes ready to use with no need for user calibration, minimizing downtime and training.

• Supports Infection Control: Allows validation of thermometer performance without direct patient contact.

The post Covidien Genius™ 2 Thermometer Checker / Calibrator appeared first on Robin Medical Ltd.

• Can be offered with fresh calibration certificate.
• Supplied With: Test leads & Operating manual.
• Immediate dispatch 
• Features:
  • Eternal Pacemaker Analyzer Testing for an entire range of external pacemakers.
  • DALE400 has been specifically designed for use with all external cardiac pacemakers including invasive (transvenous) and non-invasive (transcutaneous) types. Its impressive range of tests and simulations will meet the needs of all cardiac units.
  • Handheld portability
  • All necessary test leads
  • Large, 2-line LCD display
  • Comprehensive test ranges
  • Replaces 5 separate test devices
•  Specifications:
  • Display:
    • 2-line × 16-character LCD
  • Inputs
    • Ventricle pacing signal: (0-12 V, 25 mA), (500 Ω load)
    • Atrial pacing signal: (0-12 V, 25 mA), (500 Ω load)
    • Transthoracic pacing signal: (0-40 V, 250 mA), (50 Ω load)
  • Outputs:
    • Parallel printer port
    • Serial computer port
  • Measurement of Pacing Pulse
    • Amplitude: 0 to12 V invasive, 0 to 40 V noninvasive
    • Rate: 30 to 300 BPM
    • Pulse length: (< 1 to 50 ms)
    • AV Time Interval: 0 to 1000 ms
    • 50/60 Hz Interference Signal: 0 to 25 mV in 1 mV steps
    • Refractory Period Measurement: 20 to 500 ms
    • Simulated R-, S- & T-Waves: Width 5, 10…, 100, 200 ms
    • Waveforms: Square, triangle, haversine, ISO Rate (30 to 120 BPM)
    • Amplitude: 0 to 25 mV, in 0.5 mV steps
    • Long-Term Tests: Reference value for pulse rate, amplitude and length established from first 10 pulses. Thereafter, any deviation over 10% (adjustable) is flagged.
    • Power: Four AA cells, Current drawn 20 mA approx. or connect to 9 VDC supply.
    • Dimensions: 7.5” L × 5.5” W × 1.5” H (18 cm L × 13 cm W × 4 cm H)
    • Weight: 1.54 lbs (700 g)

The post Pacer analyzer PMA-1 appeared first on Robin Medical Ltd.

• Code: 13020
• Version: 2.6
• Offered with 3 months warranty.
• Immediate Dispatch.
• Can be offered with Fresh calibration Certificate at extra cost
• Features:
  • Energy and cardioversion measurement.
  • Peak voltage and current reading.
  • Storage and playback of output waveform.
  • 12 lead ECG simulation.
  • ECG, Performance and Arrhythmia simulation.
  • Automatic defibrillator test procedures. (Emergency scenarios using PRO-Soft QA-40M/45)
  • Pacemaker loads from 50 ohm to 2300 ohm.
  • Accuracy Tests: Amplitude, Rate, Pulse Width.
  • Demand Sensitivity Tests.
  • Refractory Period Tests: Sensed and Paced.
  • 60/50 Hz Immunity Test.
  • Pulse Energy.
  • Large graphic display.
  • RS-232C and Centronic printer interface.
  • Battery operation or AC adapter.
  • The QA-45 Defibrillator / Transcutaneous Pacemaker Analyzer is a precision instrument for testing defibrillators and external (transcutaneous) pacemakers. The built-in test procedures and extensive resistance loads for pacer testing, make the QA-45 a versatile test instrument and solid value.
  • The test results can either be written directly to a printer from the QA-45, or they may be transferred to PRO-Soft QA-40M/45 test automation software. With PRO-Soft, you can make your own test protocols, store protocols and test results to disk, and provide test data to update your equipment management database
• Specifications:
  • DEFIBRILLATOR ANALYZER:
    • Energy Output Measurement:
      • High Range:
        • Voltage: <5000 V
        • Maximum Energy: 1000 J
        • Accuracy: ±2 % of reading for > 100 J ±2 J of reading for < 100 J
      • Low Range:
        • Voltage: < 1000 V
        • Maximum Energy: 50 J
        • Accuracy: ±2 % of reading for > 20 J ±2 J of reading for < 20 J
      • Load Resistance: 50 ohms ±1 %; non-inductive (< 1 µH)
      • Display Resolution: 0.1 J
      • Measurement Time Window: 100 ms
      • Absolute Max Peak Voltage: 6000 V
      • Absolute Max Peak Current: 120 A Pulse Width: 100 ms
      • Oscilloscope Output:
        • High Range: 1000:1 amplitude attenuation
        • Low Range: 200:1 amplitude attenuation
      • Waveform Storage / Playback: Discharge can be viewed via ECG outputs and paddles.
      • Output: 200:1 Time Base Expansion
      • Sync Time Measurements:
        • Timing Window: Starts – 40 ms at each R wave peak
        • Test Waveforms: All Waveform simulations available.
        • Delay Time Accuracy: ±1 ms
      • Charge Time Measurement: 0.1 to 99.9 seconds
  • ECG WAVEFORM SIMULATIONS:
    • ECG General:
      • Lead Configuration: 12-lead simulation. RL, RA, LA, LL, V1-6
      • Output Impedance:
        • Limb leads: 1000 ohms to RL
        • V Leads: 1000 ohms to RL
      • High Level Output: 1.0 V/mV of low level (lead II)
    • Manual ECG Performance Test:
      • Square wave: 2 Hz 1.0 mV p-p bipolar
      • DC Pulse: 4.0 seconds 1.0 mV
      • Sine waves: 0.1, 0.2, 0.5, 10, 40, 50, 60, 100 Hz
      • Triangle wave: 2.0 Hz
      • Amplitudes: 0.5, 1.0, 1.5, 2.0 mV (Lead II)
      • Amplitude accuracy : ±5 % (Lead II 1.0 mV)
    • ECG Performance Test:
      • Gain/Damping: 2 Hz square wave
      • Frequency Response: Low Frequency: 4 second DC pulse
      • Band Pass: 10 Hz sine
      • Monitor: -3dB point: 40 Hz sine
      • Power Line Notch Filter: 50 Hz sine
      • Linearity: 2 Hz triangle wave
      • Normal Sinus: Rates: 30, 60, 80, 120, 180, 240 & 300 BPM
      • Rate accuracy: ±1 % of selection
      • Amplitudes: 0.5, 1.0, 1.5, 2.0 mV (Lead II)
      • Amplitude accuracy: ±5 % (Lead II 1.0 mV)
    • AUTOMATIC ECG RATE TEST:
      • Arrhythmia Selections:
        • Atrial Fibrillation 1 & 2
        • Premature Atrial Contraction
        • PVC
        • Early PVC
        • R on T PVC
        • Multifocal PVCs
        • Bigeminy
        • Bigeminy Run of 5 PVCs
        • Ventricular Tachycardia
        • Ventricular Fibrillation
        • Second Degree Type 2
        • Right Bundle Branch Block
  • TRANS. PACEMAKER ANALYZER:
    • Test Load Range:
      • 50 to 2300 ohms in step of:
        • – 50 ohm up to 200 ohms
        • – 100ohm from 200 up to 2300 ohms
    • Accuracy:
      • 50 – 1300 ohm ±1 %
      • 1400 – 2300 ohm ±1.5 %
    • Oscilloscope Output:
      • 50 – 150 ohm10.24:1amplitude attenuation
      • 200 – 500 ohm41:1 amplitude attenuation
      • 600 – 2300 ohm164:1 amplitude attenuation
    • Pulse Measurements:
      • Amplitude: 4 to 300 mA (100 ohm load)
      • Accuracy: ±5 % or ±0.5 mA
      • Max. amplitude: 300 mA all loads
      • Rate: 30 to 800 ppm
      • Accuracy: ±1 % or 2 ppm
      • Pulse Width: 0.6 to 80 ms
      • Accuracy: ±1 % or ±0.3 ms
    • Demand Sensitivity Test:
      • Waveforms: Square(SQR), Triangle(TRI), and Haversine (SSQ)
    • ECG Output:
      • Amplitude: 0 – 4 mV
      • Resolution: 40 µV
    • Pacer Input (Load dependent):
      • Amplitude (50 ohm): 0 – 10 mV
      • Resolution (50 ohm): 40 µV
      • Amplitude: (³500 ohm): 0 – 100 mV
      • Resolution: (³500 ohm): 1 mV
    • Defib. Pads:
      • Amplitude: 0 – 10 mV
      • Resolution: 0.1 mV
    • Waveform width: 10, 25, 40, 100 and 200 ms
    • Pacer rate: 30 to 120 ppm
    • Immunity Test: 50/60 Hz Interference Signal
    • ECG Output: 0 – 4 mV peak in step of 0.4 mV
    • Pacer Input (Load dependent):
      • 0 – 10 mV peak in step of 1 mV (50 ohm)
      • 0 – 100 mV peak in step of 10 mV (³500 ohm)
    • Defib. Pads: 0 – 10 mV peak in step of 1 mV
    • Refractory Period Measurement:
      • 20 to 500 ms (both Pacing and Sensing)
      • Accuracy: ±2 ms
  • GENERAL INFORMATION
    • Temperature Range:
      • +15°C to +35°C when operating.
      • 0°C to +50°C in storage.
    • Display:
      • Type: LCD graphic display.
      • Alphanumeric format: 8 lines by 40 characters.
    • Data Input/Outputs (2):
      • Parallel printerport (1); Bi-Directional
      • RS-232C (1) for Computer control.
    • Power:
      • 2 x 9 Volt Alkaline Battery.
      • 240 VAC Battery Eliminator.
      • 115 VAC Battery EL. For US.
    • Housing: High impact plastic case.
    • DIMENSIONS: D x W x H: 28.0 cm x 24.8 cm x 9.8 cm. 11 in x 9.8 in x 3.9 in.
    • Weight: 1.85 kg / 4.1 lbs. with battery.
    • Recommended Printers: HP Deskjet, Canon Bubble Jet, or compatible

The post Metron QA-45 Defibrillator/Pacer Tester appeared first on Robin Medical Ltd.

• Offered with 3 months warranty.
• Supplied with:
  • 2 adapters
  • Operating manual.
• Immediate Dispatch.
• Can be offered with Fresh calibration Certificate at extra cost
• Features:
  • output energy, sync time, peak measurements, overshoot, bi-directional RS232, waveforms, charge time measurements, 28 programmable autosequences, 
  • Run on 9VDC PP3 battery or mains power adapter.
  • Note: pacer option is not installed.

The post Bio-Tek QED-6M Defibrillator Tester appeared first on Robin Medical Ltd.

• P/N: 0620-0340
• For calibrating US probe for BladerScan BVI 6000 & 9000 Series balder scanners.
• 3 parts system: Tank Base, calibration target & Tank Lid
• Immediate dispatch.

The post Verathon Calibration Tank appeared first on Robin Medical Ltd.

• Hand held tester to test most SPO2 sensors brands, very simple to use and run on 4 AA batteries.
• Model: VG900
• YOM: 2003
• Direct connect to: Datascope, Nellcor & Ohmeda type SPO2 sensors and connect to MASIMO, Datex-Ohmeda, Spacelabs & Critikon sensors with adapter cables.
• Supplied with:
  •  Carrying Case, P/N: 0013110
  • 4 adapter cables for:
    • MASMO 
    • Spacelabs, P/N: 0013145
    • Critikon, P/N: 0013150
    • Datex, P/N; 0013131

The post Viamed VG900 SPO2 Sensors Test Unit appeared first on Robin Medical Ltd.